The TCS-12 is a wartime naval communications receiver associated with the famous Collins Radio Company. It was designed as part of the TCS (Transmitter-Receiver) radio equipment used by the US Navy during the Second World War. It was built for practical, rugged communications aboard small naval vessels, particularly PT boats, landing craft and other ships, as well as shore stations. The receiver is identified as the Navy type CMX-46159.
I had one of these receivers back in the 1960s. It took me quite a while to get it working as I was 16 at the time and I didn’t know what I was doing. Sixty years on, and I still don’t know what I’m doing! Once I got it working, I was very pleased with myself, and the radio.
Technical specifications
| Specification | Details |
|---|---|
| Manufacturer/design | Collins Radio |
| Navy designation | CMX-46159 (TCS-12) |
| Frequency range | 1.5–12 MHz |
| Bands | 3 |
| Valves | 7 |
| IF frequency | 455 kHz |
| Antenna | Originally designed for a 20-foot whip |
| Power | 12 V DC filament supply and 220 V DC HT |
| Typical use | Shipboard and shore HF communications |
Valve line up
| Valve | Function |
|---|---|
| 12SK7 | RF amplifier |
| 12SA7 | Frequency converter |
| 12SK7 | First IF amplifier |
| 12SK7 | Second IF amplifier |
| 12SQ7 | Detector and BFO |
| 12A6 | Master oscillator / crystal oscillator |
| 12A6 | Audio output |
The two IF amplifier stages operating at 455 kHz, together with the RF amplifier, give the receiver good sensitivity for HF communications.
Tuning and frequency control
- MO (Master Oscillator): Normal continuously variable tuning.
- Crystal control: The receiver can use one of four plug-in crystal units selected from the front panel.
Each crystal unit contains two crystals. One provides the oscillator frequency required for reception, while the other is used for frequency spotting. This was particularly useful in military communications, where operators often needed to return to predetermined frequencies rather than search the band.
The tuning dial itself is relatively simple, and it doesn't have the precision or electrical bandspread found on later amateur receivers. It was designed primarily for dependable communications rather than leisurely tuning across amateur bands.
The controls
The receiver provides the essential controls for communications operation:
- RF Gain: controls receiver front-end gain.
- Audio Gain: controls listening volume.
- Tuning: mechanical tuning of the receiver.
- CW pitch: adjusts the beat note for Morse reception.
- Reception switch: selects modes and noise-limiter functions.
- Oscillator selector: selects master oscillator or crystal operation.
The reception switch offers MOD, MOD-NL, CW and CW-NL positions, providing a noise limiter when selected.
Power supply
The receiver was not designed to run directly from an ordinary mains supply. Its standard naval installation used a power unit incorporating dynamotors, supplied from the vessel's 12-volt DC system.
The receiver requires approximately:
- 12 V DC for the valve heaters.
- 220 V DC for the HT supply.
The matching transmitter required additional high voltage, including a 400 V supply. The complete TCS installation therefore normally consisted of receiver, transmitter and power supply, often with an antenna tuning unit as part of the installation.
The TCS was more than just a receiver. It was a complete HF communications system, designed to provide both CW and voice communications.
| Equipment | Role |
|---|---|
| TCS Receiver | HF reception |
| TCS Transmitter | CW and AM transmission |
| Power unit | Supplies low and high voltages |
| Antenna tuning equipment | Matches the antenna system |
The matching transmitter, COL-52245, was capable of CW and voice operation. Depending on the transmitter variant, output was approximately 25–40 watts CW and 10–20 watts voice. Here is my page on the Collins TCS-12 transmitter.
Where the TCS-12 was used
The TCS series was used in a variety of naval environments:
- PT boats: where compact, rugged communications equipment was essential.
- LSTs and smaller landing craft: for ship-to-ship and operational communications.
- Shore stations: as HF communications equipment.
- Patrol and other naval vessels: including later post-war use.
Remarkably, the equipment remained in service well beyond the Second World War. There were sets still being used operationally in the US Navy in the 1960s, including aboard a destroyer and at shore installations.
TCS-12 manual here, covering the transmitter and receiver.
