G4NSJ – Aircraft long wave communication

G4NSJ HOME PAGE

The days when aircraft communication took place on long wave were an interesting period in aviation history. Before modern VHF air band radio became standard, aircraft relied heavily on low-frequency and long-wave radio, Morse code and early radio telephony to communicate with ground stations. It was an era of large aerials, valve transmitters, radio operators and some remarkably ingenious equipment.

The early days: 1910s and 1920s

Radio first became established in aircraft during the First World War. The earliest systems were fairly primitive:

  • Spark-gap transmitters were used.
  • Communication was almost entirely by Morse code.
  • Aircraft carried wireless operators on larger machines.
  • Ground stations received messages and passed weather and operational information to pilots.
  • Equipment was heavy and required considerable electrical power.

The radio operator would sit in the aircraft, wearing headphones and operating a Morse key.

Long-wave frequencies

During the 1920s and 1930s, aviation made extensive use of low-frequency (LF) and medium-frequency (MF) radio.

Some interesting historical frequencies include:

FrequencyHistorical use
278 kHzGround-to-air tower communications
325–336 kHzEuropean aviation Morse telegraphy
340–350 kHzEuropean aviation radiotelephony
500 kHzInternational maritime and aviation-related emergency working

These frequencies are interesting to vintage radio enthusiasts because they are in a part of the spectrum that is very different from today's familiar VHF air band. A 1935 technical paper on European airline radio equipment specifically documents the use of 325–350 kHz for aircraft communications.

Typical installations included:

  • Valve receivers.
  • Separate radio transmitters.
  • Large aerial wires, sometimes trailing behind the aircraft.
  • Morse keys and headphones.
  • Mechanical tuning controls.
  • High-voltage power supplies.

Some aircraft had dedicated radio operators, particularly on long-distance commercial routes. By the early 1930s, voice communication was becoming increasingly practical, although Morse continued to be important.

Long-wave communication work

Long-wave radio had some useful characteristics. Its signals could follow the curvature of the Earth through ground-wave propagation, making it useful for relatively reliable regional communications. However, there were disadvantages:

  • Large aerials were needed.
  • Atmospheric electrical interference could be troublesome.
  • Aircraft installations were difficult because of their size.
  • Long-distance communications could be affected by propagation conditions.

For longer journeys, particularly over oceans, HF radio became increasingly important. Some early aviation systems used different frequencies for aircraft-to-ground and ground-to-air transmissions.

The transition to VHF

During the 1930s and particularly around the Second World War, VHF technology began to change aviation communications. VHF offered:

  • Clearer voice communications.
  • Less atmospheric interference.
  • Smaller aerials.
  • Better frequency separation.
  • More practical communication between aircraft and air traffic controllers.

Eventually, the old LF and MF air-ground communication systems largely disappeared from routine aviation communications.

See also HF aircraft frequencies, the ARC-5 aircraft HF valve transmitter, VOLMET aviation weather broadcasts and VHF airband radio.